Metal detector – Hoang Long Technology

Protection from the ingress of water and bacteria becomes easier

OneViet — Sat, 30 Nov 2019 07:04:41 +0000

The RUN-WET^® specification of the Loma IQ4 Metal Detector is IP69k rated and hygienically designed in conjunction with EHEDG guidelines to offer the best cleaning standards, reduce the risk of bacteria contamination, maximise production efficiencies and provide peace of mind to high-care food environments needing microbes prevention.

Why RUN-WET is especially designed for a high-care environment

Better food safety

The device is designed to be more hygienic to avoid food contamination, prevent food safety risks at the factory, protect the brand, meet Code of Practice and food safety standards, and provide Bacterial prevention assurance.

Improve hygiene

All components are rated IP69K and are fully accessible for quick and easy cleaning according to the highest standards, plus no drying time required, production can be recommended immediately. .

Higher reliability

Designed in accordance with EHEDG guidelines and a high care environment, RUN-WET® is less affected by water ingress, protects it from corrosion, keeps the line running and reduces costs and time. downtime.

More effective

RUN-WET helps to ensure the efficient operation of the plant with faster cleaning, no drying time while minimizing machine breakdowns. Therefore production capacity is maximized and ultimately profit.

RUN for more peace of mind

1 | Open Frame Design
The hygienically designed open frame uses angled surfaces and minimal welds in line with EHEDG principles to reduce excess water and cleaning chemicals pooling on flat surfaces.

2 | Superior Surface Finish
Improved surface finish provides better cleaning and with multi-angled surfaces and quick removable covers, helps reduce the risk of corrosion and the accumulation of bacteria.

3 | IP69K Components
Wash-down proof components including motors, lamp & sounder, Schmersal controls and enclosed pneumatics,for use within high-care environments provide a Designed to Survive^® inspection system.

4 | Hygienic Mountings
Items including bearings, PEC’s, test switches and the bin lock monitor have been mounted on stand off’s away from the surface finish to provide open access for thorough cleaning.

5 | Hygienic Reject Bin
The new hygienically designed reject bin comes with a raised window providing easy viewing, and a lower grid base with drainage holes for quick draining following wash-down cleaning.

6 | New Machine Feet
The height adjustable hygienic feet have been designed to provide no exposed threads, helping to remove the risk of bacterial accumulation points and dust traps within the system.

7 | Cable Hoops
The use of metal cable hoops removes the need for cable ties and allows a hygienic solution to thoroughly clean in between the system cables and air tubes to remove food debris.

8 | Blue Plastic
This system uses blue plastic components including pushers, guides, wear strips and PEC mounts throughout the design of the machine to allow for easy visible inspection.

The post Protection from the ingress of water and bacteria becomes easier appeared first on Metal detector - Hoang Long Technology.

Importance of a performance verification system (PVS)

OneViet — Sat, 30 Nov 2019 07:01:54 +0000

Why a Performance Validation System (PVS) is critical in verifying inspection machinery is continuously detecting at the required levels.

Installing a metal detector or X-ray system as a critical control point on your production line is a great step to ensure safe product free from physical contaminants. However, your actions do no stop once the inspection system is installed. Ongoing verification and regular monitoring of this critical control point is also necessary to make certain that contaminants are continually being detected by the machine at the required levels.

The new IQ4 metal detector and X5C X-ray series from Loma feature a Performance Validation System (PVS) that allows customers to confirm that the desired level of inspection is being achieved. On regular intervals, the system prompts the operator to perform detection tests using test pieces. It measures the performance against the desired detection targets set for each product which results in either a pass or a fail. If the performance validation test is failed, all product that ran through the metal detector or X-ray since the last test will need to be retested or recalled for possible contaminants. If the test is passed, the line will continue to operate as normal until the next test is requested.

Once a performance validation test has been requested, the operator has 30 minutes to complete the test otherwise the system will stop the line. This enforces that safe food is a number one priority on the line, benefitting the business by protecting it from potential recalls and safety nonconformances, as well as the consumers from receiving contaminated product.

The PVS not only ensures the metal detector or X-ray is properly detecting metal contaminants, but also captures evidence that the machine is working properly for food safety audits. Once a test is completed, the results are logged and reports can be pulled. With regulations becoming more and more strict, and documentation being an essential part of compliance, it is extremely important to record how your critical control points are being continually tested and validated.

Watch the video to learn more about how the LOMA Performance Validation System works on a metal detector.

The post Importance of a performance verification system (PVS) appeared first on Metal detector - Hoang Long Technology.

Transferring & Installing successfully IQ4 new technology metal detector system

OneViet — Sat, 30 Nov 2019 06:50:42 +0000

Loma Metal Detector System – IQ4 is one of the most advanced metal detectors of Loma System Manufacturer from the UK in the field of food. Loma is not only one of the world’s leading brands in metal detection technology in the manufacture of Pharmaceuticals, Food, Confectionery … but also pioneers in X-ray quality control solutions. -Ray and Balance weight check.

The metal detector combined with the IQ4 conveyor belt provides a 7-inch touch screen with a new interface designed to manipulate the installation, operation and maintenance of this IQ4 system that looks brighter and minimizes errors for users. . This system uses LOMA’s advanced technologies and more than 50 years of experience in polluting metal detection solutions in the food industry and provides optimization mechanisms to improve performance by How to use frequency detection or conversion (from 31 to 882 KHz) LOMA’s conveyor systems comply with strict international standards such as IFS, BRC and FSMA; and may also be provided with the highest level of compliance to meet the strict Retail Practice Code (COP).

Through the actual survey process, Hoang Long Technology Co., Ltd. has advised sales to customers on the metal detection system combining IQ4 conveyor belt with a conveyor speed of 30m / min. This conveyor system has an Automatic Pusher Reject when metal is detected – meaning that the system will work continuously while still being able to remove contaminated products. This is one of the preeminent features of the IQ4 system as it does not require downtime and eliminates defective products. This customer also required the system to be installed inline in the finished product packaging line.

For more information about IQ4 food metal detectors please contact.

Hoang Long Technology Co. Ltd.
Marketing room
Email: marketing@congnghehoanglong.com
Or Hotline: 0907 686 889

The post Transferring & Installing successfully IQ4 new technology metal detector system appeared first on Metal detector - Hoang Long Technology.